Dual Calcium ISE + pH meter This calcium *ion meter (*laboratory precision) is a nanotechnology instrument used to obtain reliable data using data combining a calcium selective electrode and a pH electrode. Multiparameter instrument for Ca2+ ion concentration and pH analysis ( imacimus 2: pH and ISE) The calcium electrode meter is used to measure calcium ions and pH simultaneously in aqueous solutions.
Examples where calcium monitoring should be applied:
The ion analyser for calcium and pH is supplied with powerful analysis software that displays the measurement (and allows identification) and allows customised calibration up to 5 customised standard points, among other features. Continuous monitoring is also available for the study of short-term reactions or processes.
The calcium ion sensor is a replacement module and can be exchanged for a new calcium sensor or any other sensor available in our catalogue.
Note the limited lifetime of the ISE sensor, even if they are stored on a shelf or installed in a probe. Different sensors differ by several months under the same conditions.
Una sonda única de calcio
pH IÓNICO único
medidor de calcio
Cable USB
NT Sensors software
– 1x Dual channel ION/ mV/ pH / CALCIUM METER for use with PC/Laptop.
Ref.
Imacimus 2 Meter – 1x Software for Windows (free download) – 1x USB data/power cable – 1x SINGLE ION PROBE.
Support for up to 1 Mini ISE.
– 1x Mini calcium electrode – 1x Reference electrode/pH – 1x Standard Calibration 10 mg/L Calcium 100mL – 1x Standard Calibration 100 mg/L Calcium 100mL – 1x Standard Calibration 1000 mg/L Calcium 100mL – 1x Buffers pH4 (50 ml) – 1x Buffers pH7 (50 ml) – 1x User’s manual
Your pH and calcium tool kit comes with all the elements you need to start reading samples.
Employing the same operating principle as standard laboratory electrodes
The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
Ion selective electrodes have a wide concentration measurement range.
Specifications
Data
ISE range
0.4 to 4,000 mg/L
ISE/pH resolution
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9999 ppm is 1 ppm
ISE accuracy
±4 % or 8 % * In the absence of interfering ions, the accuracy may be better than ±1 mV, i.e. corresponding to ±4 % of the measurement.
(For divalent ions, ±2 mV; ± 8 %)
Repeatability ISE
±10% monovalent ±20% divalent ** Repeatability in the measurement of a standard solution after calibration.
ISE/pH calibration
From 2 to 5 points. Fully customizable calibration standards.
