K-VI IC2-KIT (pH + K Meter)
The ion analyser, combined with the pH sensor, includes advanced analysis software that displays real-time measurements and facilitates identification. The software also allows custom calibrations with up to five set points, among other features. Continuous monitoring is available for short-term reactions or process studies.
The ion sensor is modular and can be replaced with a new sensor or any other sensor from our catalogue. It is important to note that the ISE sensor has a limited lifetime, even when not in use, whether stored on a shelf or installed in a probe.
Employing the same operating principle as standard laboratory electrodes.
- The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
- Ion selective electrodes have a wide concentration measurement range.
| Specifications |
Data |
| Rango ISE |
1…10.000 mg/l |
| ISE/pH resolución |
0 to 14pH es 0,01 pH
0 to 1.0 ppm es 0.1 ppm
1 to 9000 ppm es 1 ppm |
| ISE accuracy |
±4% * In the absence of interfering ions, the accuracy can be better than ±1mV, which corresponds to ±4% of the measurement. |
| ISE repeatability |
±10% monovalent ** Repeatability in the measurement of a standard solution after calibration |
| ISE /pH calibration |
2 to 5 points. Fully customisable calibration standards. |
| Power Supply |
USB – 5V -0.5A |
| Temperature range |
4- 50 ºC |
| Interface |
Imacimus software application for Windows |
| Connectivity |
Mini USB female AB type connector |
| Method |
Electrochemical / ISE |
