This ISE magnesium + pH meter (*laboratory precision) is a nanotechnology instrument used to obtain reliable data using data combining a magnesium selective electrode and a pH electrode. Multiparameter instrument forMg2+ ion concentration and pH analysis ( imacimus 2: pH & ISE)
The magnesium electrode meter is used for simultaneous measurement of magnesium ions and pH in aqueous solutions.
Examples where magnesium control can be applied:
The Ion analyzer for Magnesium & pH is supplied with a powerful Software analysis that displays measure ( and allows to identify it) and allows to customize your calibration up to 5 customized standards points, among other characteristics. Continuous monitoring is also available for short-term reaction or process studying.
Magnesium ion sensor is a replacement module and can be exchanged for new Magnesium sensor or any other sensor tip available from our catalogue.
Take note the limited life expectance of ISE sensor, even they are stored on a shelf or installed in a probe. Different sensors differ in several months in the same conditions.
SKU: PRO1073-MG2
GTIN: 8436610061933
Dual Channel ION/mV/pH for use with PC/Laptop.
Software for Windows
USB cable for data/power
Single ION PROBE.
Mini Magnesium Electrode
Reference electrode/pH
Calibration Standard 10 mg/L Magnesium (100 mL)
Calibration Standard 100 mg/L Magnesium (100 mL)
Calibration Standard 1000 mg/L Magnesium (100 mL)
pH buffers 4/7 (2x50ml)
Deionized water (50 mL)
User manual
Your pH and magnesium ion tool kit comes with all the elements you need to start reading samples.
Employing the same operating principle as standard laboratory electrodes
The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
Ion selective electrodes have a wide concentration measurement range.
Specifications
Data
ISE range
1 to 62.000 mg/L
ISE/pH resolution
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,999 ppm is 1 ppm
ISE accuracy
±4% or 8% * In the absence of interfering ions, the accuracy can be better than 1 mV, which corresponds to 4% of the measurement.
Repeatability ISE
±10% monovalent ±20% divalent ** Repeatability in the measurement of a standard solution after calibration.
ISE/pH calibration
From 2 to 5 points.
Fully customizable calibration standards.
