Nitrate + pH ISE Meter

Dual ISE Nitrate + pH Meter

This *nitrate ion meter (*laboratory precision) is a nanotechnology instrument used to obtain reliable data using a nitrate selective electrode and a pH electrode. Multiparametric instrument for NO3- ion concentration and pH analysis ( imacimus 2: pH & ISE)

The nitrate electrode meter is used to measure nitrate ions and pH simultaneously in aqueous solutions.

Typical nitrate reduction or denitrification processes require monitoring of nitrate production levels.Current regulations set nitrate levels below 40 mg/L for tap water supplies.Also fertilization with organic fertilizer is beginning to be regulated.Use this easy on-site kit to monitor and comply with environmental regulations.

Nitrate control application examples:

  • Environmental sciences
  • Wastewater
  • Groundwater
  • Irrigation solutions
  • Rivers and lakes
  • Nitrate contamination
  • Soil
  • Fertilizers
  • N-NO3 in plant tissue

IC2-KIT (pH + Nitrate)

The ion analyser for nitrate and pH is supplied with a powerful software wizard to perform the analysis. Display and edit the measurement description, including ID, date and time. The software allows you to customise your calibration up to 5 customised standard points, among other features. Continuous frequency monitoring can be configured for short and medium term reaction study.

The nitrate ion sensor is a replacement module and can be exchanged for the new nitrate sensor tip or any other sensor parameter tip available in our catalogue.

Note the limited lifetime of the ISE sensor, even if they are stored on a shelf or installed in a probe. Different sensors differ by several months under the same conditions.

 

 

  • Dual Channel ION/mV/pH for use with PC/Laptop.
  • Software for Windows
  • USB cable for data/power
  • Single ION PROBE.
  • Mini Nitrate Electrode
  • Reference electrode/pH
  • Calibration Standard 10 mg/L Nitrate (100 mL)
  • Calibration Standard 100 mg/L Nitrate (100 mL)
  • Calibration Standard 1000 mg/L Nitrate (100 mL)
  • pH buffers 4/7 (2x50ml)
  • Deionized water (50 mL)
  • User manual

Your pH and nitrate ion tool kit comes with all the elements you need to start reading samples.

Employing the same operating principle as standard laboratory electrodes

  • The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
  • Ion selective electrodes have a wide concentration measurement range.
Specifications Data
ISE range 1 to 62.000 mg/L
ISE/pH resolution 0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,999 ppm is 1 ppm
ISE accuracy ±4% or 8% * In the absence of interfering ions, the accuracy can be better than 1 mV, which corresponds to 4% of the measurement.
Repeatability ISE ±10% monovalent ±20% divalent ** Repeatability in the measurement of a standard solution after calibration.
ISE/pH calibration From 2 to 5 points.
Fully customizable calibration standards.
Power Supply USB – 5V – 0.5A
Temperature range 4-50 ºC
Interface Imacimus Windows software application ws
Connectivity Mini USB female connector type AB
Method Electrochemical / ISE

imacimus 2 guide

Guidance software

Single ION guide

Click here to visit the warranty page

Additional information

Weight 2 kg