IC2-KIT (pH + Sodium analyser)
The ion analyser for sodium and pH is supplied with a comprehensive analysis wizard software that offers fast and accurate measurement (including Good Laboratory Practice (GLP)) and allows customised calibration up to 5 customised standard points, among other features. Continuous monitoring is also available for the study of short-term reactions or processes.
The sodium ion sensor is a half-cell replacement module composed of PVC and can be exchanged for a new sodium sensor when depleted or any other sensor tip available in our catalogue. This reduces the environmental impact on waste generation. The sensor tips are easily replaced by the user in less than 1 second.
Note the limited lifetime of the ISE sensor, even if they are stored on a shelf or installed in a probe. Different sensors differ by several months under the same conditions.
¿More information on sodium ion selective electrode?
– 1x Dual Channel ION/ mV/ pH / SODIUM METER for PC/Laptop use.
Ref.Imacimus 2 Meter
– 1x Software for Windows (free download)
– 1x USB data/power cable
– 1x SINGLE ION PROBE. Acts as a holder for up to 1 Mini ISE.
– 1x Mini Sodium Electrode
-1x pH Electrode
– 1x Calibration Standard 10 mg/L Sodium 100mL
– 1x Calibration Standard 100 mg/L Sodium 100mL
– 1x Calibration Standard 1000 mg/L Sodium 100mL
– 1x Buffers pH4 (50 ml)
– 1x Buffers pH7 (50 ml)
– 1x User’s Manual
Your pH and sodium tool kit comes with all the elements you need to start reading samples.
Sodium
Employing the same operating principle as standard laboratory electrodes
- The potentiometry technique (ISE) is relatively inexpensive and easy to operate.
- Ion selective electrodes have a wide concentration measurement range.
| Specifications |
Data |
| ISE range |
2.3 to 23,000 mg/L |
| ISE/pH resolution |
0 to 14 pH is 0.01 pH
0 to 1.0 ppm is 0.1 ppm
1 to 9,999 ppm is 1 ppm
|
| ISE accuracy |
In the absence of interfering ions, an accuracy of better than 1 mV can be obtained, which corresponds to ±4% of the measurement.
(For divalent ions, ±2 mV; ±8 %)
|
| Repeatability ISE |
±10% monovalent ** Repeatability in the measurement of a standard solution after calibration.
|
| ISE/pH calibration |
From 2 to 5 points.
Fully customizable calibration standards.
|
| Power Supply |
USB – 5V – 0.5A |
| Temperature range |
4-40 ºC |
| Interface |
Imacimus Windows software application ws |
| Connectivity |
Mini USB female connector type AB |
| Method |
Electrochemical / ISE |
